The Fiber Optics On-Line Store
 
HOME PRODUCTS ETHERNET DATA  REPEATERS  VIDEO CONTACT US   SITE MAP
 
Model CGM3650 Series of Media Converters

10/100/1000Base TX to 1000Base SX, Multimode or Single-Mode Fiber
 


 

  
CGM3650C: Front View (Top) / Rear View (Bottom)  
 
Model   Quantity Price  
CGM3650C Multi-Mode Duplex-SC  220 Meters
850nm with 115 VAC External Power Supply		  

$232.00

CGM3650C10 Single-Mode 10km Duplex-SC 10 km
1310nm with 115 VAC External Power Supply		  

$456.00

CGM3650C30 Single-Mode 30km Duplex-SC 30 km
1550nm with 115 VAC External Power Supply		  

$703.00

 


TECHNICAL SPECIFICATIONS

  • Standards: IEEE 802.3z 1000Base-SX/LX, IEEE 802.3ab 1000Base-T,
                           IEEE 802.3u 100Base-TX, IEEE 802.3 10Base-T
     
  • Connectors: 
    Model Connector A
    Connector B
    CGM3650C Multi-Mode Duplex-SC 850nm
    RJ-45 (auto MDI/MDI-X selection)

    [ If TP FORCE mode is enabled (i.e. SW1-2=ON), RJ-45 connector can only run at 1000 Mbps. Speed other than that will not be supported! ]
    CGM3650C10 Single-Mode 10km Duplex-SC 1310nm
    CGM3650C30 Single-Mode 30km Duplex-SC 1550nm

     
  • dBm: 
     
    Model Connector
    Max TX Pwr
    Min TX Pwr
    Sensitivity
    Power Budget
    CGM3650C MM Duplex-SC
    -4 dBm
    -10 dBm
    -17 dBm
    7 dBm
    CGM3650C10 SM-10km Duplex-SC
    -3 dBm
    -13 dBm
    -20 dBm
    7 dBm
    CGM3650C30 SM-30km Duplex-SC
    0 dBm
    -6 dBm
    -22 dBm
    16 dBm

     
  • Data Transfer Rate (Mbps):
    1000 Mbps for Gigabit fiber (1000Base-SX/LX)
    1000, 100, or 10 Mbps (auto-negotiation) or 1000 Mbps (force mode) for Gigabit copper (1000Base-T)
    100 or 10Mbps (auto-negotiation) for Fast Ethernet copper (10/100Base-TX)
     
  • Duplex Mode:
    Full-Duplex only for 1000Base-SX/LX/T
    Full-/Half-Duplex (auto-sense) for 10/100Base-TX
     
  • Cable/Max Distance:
    Category 5 Unshielded Twisted-Pair (UTP) cable or better, up to 100 m
    62.5/125µm or 50/125µm (recommended) Multi-Mode fiber, up to 220 m
    9/125µm Single-Mode fiber, up to 10~30 k m (model dependent)
     
  • LEDs:
     
    LED
    Color
    Function
    PWR
    Green
    Lit when +5V power is coming up
    LFP
    Green
    Lit when Link Fault Pass-through is ON
    FX LNK/ACT
    Green
    Lit when fiber connection is good
    Blink when any traffic is present
    TP LNK
    Green
    Lit when TP connection is good
    TP SPD
    Green / Yellow
    Lit in GREEN when 1000Base-T is active
    Lit in YELLOW when 100Base-TX is active
    OFF when 10Base-T is active
    TP FDX
    Yellow
    Lit when TP Full-duplex mode is active
    Blink when TP Collision happens in half-duplex mode

     
  • Power Requirement:
     CGM3650C Series — 115/230 VAC External Power Converter -
                                     2A up @+5V DC, 5W consumption                     
     
  • Operating Temperature: 0° to 50° C
     
  • Humidity: 5% to 90%
     
  • Dimension:
     CGM3650C Series — 31 x 97.8 x 127.1 mm (H x W x D), Metal Chassis
     
  • EMI Rating: FCC Class A, CE Mark

 

 

HOME PRODUCTS ETHERNET DATA  REPEATERS  VIDEO CONTACT US   SITE MAP

CONTACT TelComStor at:
 

Sales:  Shop@TelComStor.com

Technical Support: Support@TelComStor.com

Order Status: Order@TelComStor.com

http://www.TelComStor.com